![]() |
|
ATV Exhaust
ATV ExhaustCategory - ATV Exhaust Silencer
If you do not see your particular model listed under ATV Exhaust -, please call us at 1-877-327-5270 toll free and we can always check to see if we have anything for your ATV. The ATV Exhaust Silencer - attaches to the stock -. If there is not enough lip or tail pipe to attach to, then an adapter is required to complete the installation. Some adapters need to be welded to the stock pipe to create an attachment point. Other models have an optional bolt on adapter that is available for an extra $21.95. Also, there are some models that do not require any type of adapter. Some particular ATV Exhaust Silencer Adapters - need to be welded to the tail pipe that drops out the bottom of stock -. This gives the silencer something to attach to. The silencer is not permanent, just the 1 1/2" adapter. Note: The ATV Exhaust Silencer - is not a permanent device, you can choose to leave it on or take it off by 2 bolt hangers. The ATV - Exhaust silencer - is easy to install. Depending on whether or not an adapter is needed, here are is the general procedure. The ATV - Exhaust silencer is slid over the attached adapter, if needed. Drill 2 small holes in the cross member. Then place the silencer onto the adapter and insert bolts through flat hanger brackets and through cross member. Follow with rubber grommets, washer, and nut. Tighten for secure hold.
|